Working With The Shredder; Safety And Technical Remarks - P.Lindberg 9061374 Original Bedienungsanleitung

WORKING WITH THE SHREDDER

Safety and technical remarks

1. The user should be 18 years old or more.
2. The machine should be positioned on a
3. Users must wear safety
4. When working in a confined
and lighting, in order to reduce the risk of suffocation and
5. Only one person at a time should operate the machine.
6. Pieces jamming the input tube can only be removed safely when the engine is
stopped, the spark plug cap removed and the rotor is stopped and blocked. lf
necessary, unbolt and tip the input and output tubes to facilitate access to the
rotor. Use a wooden pole to remove pieces stuck in the rotor. Never use your
hands. (fig. 6 - 8)
7. Never leave the machine running unattended.
8. Changing the blades of the rotor or the counter blade and checking blade bolts
should only be done when the engine and rotor are
removed and the rotor is blocked.
9. After one hour of use always check that all bolts and nuts are still tightened
properly. lf not, tighten them again!
P. Lindberg A/S
Tlf: 70212626
horizontal,
gloves, ear-protection and safety goggles.
space, always make sure there is sufficient ventilation
6
Sdr. Ringvej 1
DK-6600 Vejen
firm surface.
(fig. 4)
injury.
stopped, the spark plug cap is
MAN 9061374 EN V2
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk