Error Table; Error Code - Fabita ORDINE Anleitung

EN

ERROR TABLE

CODE

ERROR CODE

(Flashing light): no pot on the
cooking zone, or the material
U
of the pot is not correct. the
induction hob will be off
automactically after 1min
E1 The voltage is below 85V
E2 The voltage is higher than
285V
E3 Cooking zone cooking
temperature device is not
working
E4 IGBT (Inner) device is not
working
E5 Cooking zone cooking
temperature is higher than 280
celsius
E6 IGBT (Inner) temperature is too
high
Er Main PCB and light PCB
communication not working.
Too much water on the touch
pannel area over 10s;
r
or touch over 2 buttons
together over 10s
28
ADVICES
Use proper induction pots
Check the voltage
Check the voltage
Contact Fabita Srl for fault reporting
Contact Fabita Srl for fault reporting
When the temperature is cool down, it will work
again
Check the air vent is not locked
Contact Fabita Srl for fault reporting
Clean the cooking zone and keep touch panel
area dry; don't touch over 2 buttons together;
restart induction hob.