Touch Control - Fabita ORDINE Anleitung

TOUCH CONTROL

A_ Locked_
A
ON/OFF. In order to deactivate it, hold the command down for 2s.
B_ Timer_
B
the zones. Please note: if you don't set the timer and you don't
activate or change the setting functions, the product will switch off
automatically after 60 mins.
C_ Power level_ -_
C
desired power level by pressing the "-" and "+" symbols, with the
default power level set at P1;
D_ Power level_ +_
D
desired power level by pressing the "-" and "+" symbols, with the
default power level set at P1;
E_ Pause end Recall_
E
functions. If you leave the function on pause for 5 mins the
product will switch off automatically.
F_ On/Off_
F
automatically after 30s. The fan will continue to work for 60s after
the product is switched off.
POT DETECTION
This cooktop is fitted with an interactive control system that
makes it very easy and comfortable to use. When a pot is removed
from an active cooking zone, the corresponding display shows the
flashing symbol. The symbol disappears if the pot is replaced on
the zone and the cooking starts again according to the previously
set regulations. The symbol also appears on one of the cooking
zones displays when:
1.
2.
13
this mode allows the lock of every function except
the timer is between 0 and 99 mins for both
If the product is in standby mode, it will switch off
The recipient being used is not suitable for induction cooking.
The diameter of the recipient used is inferior to that allowed
by the appliance.
(decreases power)_ just select the
(increases power)_ just select the
activate and deactivate the