Operation - Azusa JU-822 Bedienungsanleitung

OWNER'S MANUAL
Microphone
1. Microphone head
2. Power button
3. Battery compartment cover
Lavalier microphone (optional)
1. Antenna
2. ON/OFF switch
3. Microphone input
4. Display
5. Battery compartment cover
6. Frequency switch
TURNING ON AND BATTERY INSTALLATION
Receiver
1. Unfold the receivers antennas.
2. Plug the power adapter to power supply socket.
3. Press the power button to turn the receiver on.
Microphone
1. Twist off the battery compartment cover.
2. Insert two AA batteries (note the polarity).
3. Twist on the battery compartment cover.
4. Press the power button to turn on the microphone.

OPERATION

1. Connect the receiver to the external device, ex. an amplifier, with XLR or
6,35 mm cable connected to proper sockets.
2. After turning on the microphone, the channel connection light will light up.
3. If the microphone will detect activity, the channel activity light will light up.
4. To change the channels frequency, press the microphone power button.
5. To turn off the microphone, press and hold the microphone power button.
Note: if the voice cuts off and there is a flashing battery icon on the microphone,
it is required to change the batteries.
1 2
1
6
3
2
3
4
5
EN
7