Disclaimer; For Your Safety; Explanation Of Symbols - Panasonic MKG1500-DE Serie Installationsanleitung

Disclaimers
Panasonic will bear no responsibility in the following cases.
■ If this product is used as a measurement device for billing purposes.
■ If data is lost or corrupted due to malfunction of this product.
■ If losses arise due to use other than as described in the manual.
■ If losses arise due to remodelling, including to the construction, performance or specification of the product,
without Panasonic's approval.
■ If losses arise due to use in a task requiring a high level of safety.
This device is not to be used in systems directly or indirectly related to medical devices or human life.
■ The safety for any system incorporating the equipment is the responsibility of the assembler of the system.

For Your Safety

■ Installation should be performed by a qualified electrician.
■ If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment
may be impaired.
■ Read these instructions carefully and look at the equipment to understand the devices before trying to install,
operate, service, maintain it.

Explanation of symbols

■The following symbols are used to classify and describe the level of hazard, injury, and property damage caused
when the denotation is disregarded and improper use is performed.
■Where this symbol is marked, in order to find out the nature of the potential HAZARD and any actions which
have to be taken to avoid them.
WARNING
■The following are used to classify and descrive the type of instructions to be observed.
This symbol is used to alert users to a specific
operating procedure that must not be performed.
Do not disassemble or remodel,
as this could cause electric
shock or fire.
Do not connect using any
cable other than a CT cable
Prohibited
to the CT connector.
Failure to comply could cause electric
shock, fire or malfunction.
Do not use outside the rated
voltage.
Doing so may cause an accident.
Prohibited
Denotes a potential hazard
that could result in serious
injury or death.
CAUTION
This symbol is used to alert users to a specific
operating procedure that must be followed in
order to operate the unit safely.
WARNING
When installing or inspecting
the device, switch the mains
power off.
Leaving the power on during installation
or inspection may cause electric shock.
Compulsory
Do not use an IT earthing
system, as this could cause
electric shock or fire.
CAUTION
The power cable insulation
should be removed to suit the
strip gauge and inserted firmly.
Compulsory
Insufficient insertion may cause
overheating or fire.
3
Denotes that a hazard that
could result in minor injuries or
property damage.