What Is Included In The Box - Sharp PS-919 Bedienungsanleitung

What is included in the box

1 x PS-919
1 x Power Adapter
1 x EU AC plug for power adapter
1 x UK AC plug for power adapter
1 x User Manual
1 x Quick start guide
1 x Warranty Card
Panels & Controls
5
6
7
8
9
TOP VIEW
1. button – Press the button to turn on the unit. Long press the
button to turn off the unit.
2. button – Short press: changes the front light mode
Long press (2 sec): changes the side light mode
Longer press (4 secs): switch all the lights off
3. button – Shortly press the button to toggle between Bass & 3D
surrounding modes:
A. Bass Off , 3D Off - orange LED is off
B. Bass On, 3D Off - orange LED continuously light
C. Bass Off , 3D On - orange LED slowly fl ashing
A long press of the button will swich off both modes: Bass Off , 3D Off .
4. button – Press the button to turn up the playing volume. Long
press the button to skip to the next playing track.
5. SOURCE button – Press the button repeatedly to switch the playback
mode: Bluetooth, AUX, USB. A long press of the button will activate
the TWS/Duo mode function.
Note that the USB mode can only be selected if a USB stick is plugged
into the unit.
6. button – Press the button to play or pause the playback. Long
press of the button will disconnect bluetooth connection.
7. button – Press the button to turn down the playing volume.
Long press the button skip to the previous playing track.
8. SOURCE INDICATOR – Switch to Bluetooth mode, the blue light turns
on and starts fl ashing when pairing. Once paired, the blue light stops
fl ashing. Switch to USB mode, the blue light fl ashes rapidly three
times, then goes off , then two seconds later, three times, and so on.
Switch to AUX mode, the blue light fl ashes slowly and continuously
9. BATTERY STATUS INDICATORS
10. 3D/Bass indication – When Bass Off and 3D surround Off LED is Off .
When Bass On and 3D surround Off orange LED continuously light.
When Bass Off and 3D surround On orange LED slowly fl ashing.
11. RECHARGING INDICATOR – When the charger is connected, red light
turns on. When the device is fully charged, the red light turns off .
1
2
REAR VIEW
1. DC 18V – AC Adapter input port.
2. USB PORT – USB port supports playback and charging. Read audio
fi les in MP3 format in USB storage device in capacity up to 32GB
(FAT32). Or Charge your mobile device through the 5V/1A USB port.
1 3. AUX IN JACK – Connect the 3.5mm audio cable to enjoy the external
audio music.
2
Operation instruction
3
4
Charging the Speaker
10
This speaker uses built-in batteries. Before using it, charge the batteries by
connecting the AC adapter.
11
Connect the AC power adapter (supplied) to the DC 18V input port on the
rear of the unit, and then to the wall outlet.
DC 18V
CAUTION: Only use the AC adapter supplied with this device. Only use the
supplied power supply. If you do not use this adapter, charging is unavailable
or charging time may diff er. And it may cause damage to the device.
Power On the Speaker
Press POWER ON/OFF button on the top panel of the unit
to power on.
First time to use, the "Source indicator" fl ashes blue,
indicating that the unit is in paring mode.
TIPS:
– In order to disable or enable the voice messaging, please press and hold
SOURCE button 3 seconds during power up operation.
– When you power on the speaker again after Bluetooth setup, the unit will
search for the previous paired device. Once found, it will paired with that
device automatically.
Power Off the Speaker
Press the POWER ON/OFF button to turn off the unit.
After 15 mins with no activity/connection the unit will automatically power
off to conserve battery.
EN EN
3