Koenic KAC3231 Gebrauchsanleitung Seite 27

Indicators
Control Remote
panel control
Timer On
Timer Off
Dry
auto
Cool
—
Heat
—
FAN
FAN
FAN
—
FAN
•
—
* Power management indicator
• When the ambient temperature is lower
(Cooling mode) or higher (Heating mode)
than the set temperature, the compressor
and fan motor stops and the power
management indicator illuminates.
IM_KAC3231_161201_V06_HR.indb 27
Function
Automatic on
activated
Automatic off
activated
Operating in de-
humidifying mode
Operating in fan
Fan
mode
Operating in auto
Auto
mode
Operating in
cooling mode
Function not
provided
Unit indicator
Power manage-
ment indicator *
High fan speed
Medium fan
speed
Low fan speed
Fan speed set to
Auto
Auto
Sleep mode on/
off
Product on/
/ —
standby
Transmitting
signal
• When the ambient temperature is higher
(Cooling mode) or lower (Heating mode) than
the set temperature, the power management
indicator turns off. The compressor and motor
starts again.
Note:
• Every press of a button on the control
panel and every successfully transmitted
signal from the remote control is
confirmed by an audible signal.
• All function of the product can be
controlled via the control panel or the
remote control, with exception of the
display illumination LED and SHORTCUT
buttons, which are to be found exclusively
on the remote control.
Mode
Mode
Auto Auto- • products selects the
matic suitable mode to achieve
mode the set temperature
• fan speed is controlled
automatically
• temperature can be
adjusted
Cooling • cools down the room
Cool
mode temperature
• the compressor runs and
stops in order to maintain
the set temperature
• fan speed and set
temperature can be
adjusted
Dehu- • dehumidifies the room
Dry
midify- with the fan
ing • fan speed and set
mode temperature cannot be
adjusted
Fan • fan only
Fan
mode • fan speed can be adjusted
• temperature cannot be
adjusted
English
Application
27
1/12/16 4:21 PM