Notes On Handling The Batteries; Insert The Batteries; Charging The Batteries - Rollei Soluna II-60 Gebrauchsanweisung

Notes on handling
the batteries

1. Insert the batteries

• Remove the battery compartment
cover by pressing down the release
button and sliding the cover over the
rails in its direction .
• Insert the two batteries using the
contact pins .
• Slide the batteries into the contacts
until they click into place .
• Note: Batteries and charger are
not included. The LED continuous
light requires 2 compatible NP-F970
batteries .
2. Remove batteries
• Press the release button and pull the
batteries out of the guide one by one .

3. Charging the batteries

• Place a battery in the charger and then
connect the power cord to the power
outlet . The battery takes about three
hours to charge .
• When the battery is fully charged, the
charging indicator changes from "red"
to "green" .
Contacts for
batteries
Unlocking button
Rail for battery compartment cover
Batteries
Contacts
Charge display
Battery contacts
19