Fohhn D Serie Bedienungsanleitung Seite 16

STATUS LEDs
Clipping and protection indicator channel 1
A
B -6dB output level indicator channel 1
C -18DB output level indicator channel 1
Signal presence indicator channel 1
D
READY indicator
E
F Over-termperature indicator
G Signal presence indicator channel 2
-18DB output level indicator channel 2
H
-6dB output level indicator channel 2
I
J Clipping and protection indicator channel 2
16 | D-Series Amps
Downloaded from www.Manualslib.com manuals search engine
Fohhn Audio DSP
(21) Display
Clearly laid out 4-line display. All information
and settings relating to the Fohhn Fusion DSPs
can be viewed on this display.
Important: Display lock protects against
unauthorised access: Setup / Keylock ON/
OFF
(20) Select potentiometer
The relevant selected values on the display are modified by way
of this input potentiometer. Pressing the potentiometer resets
the input value to its initial value.
(22) Navigation Keys
(23)
You can move to the previous or next line by pressing the Up
(24)
(24) / Down (25) buttons. The arrows > < move every time
(25)
these buttons are pressed and indicate which line is currently
active.Pressing the
Enter button (22) opens the corresponding submenu.
Press Exit (23) to return to the previous screen.
See also separate user instruction „Display Handling"!
REMOTE CONTROL RS-485
jacks
(26) RS-485 network connection sockets
(27)
The network cables are connected to the IN (26) and OUT (27)
sockets.
See also separate user instruction „Software Handling"!
(28) receive LED
LED indicates that the DSP amplifier is receiving data.
(29) send LED
LED indicates that the DSPP amplifier is sending data.
See also separate user instruction „Software Handling"!