Safety Instructions - Flex ALC 2/1–Basic Originalbetriebsanleitung

ALC2-1.book Seite 12 Donnerstag, 25. Juni 2015 10:28 10
FLEX ALC 2/1–Basic

Safety instructions

WARNING!
– Do not point the laser beam at people or
animals and do not look into the laser beam.
This measuring instrument generates laser
radiation which may cause blindness.
– Have the measuring instrument repaired by
qualified technicians and with original spare
parts only. This ensures that the safety of the
measuring instrument is maintained.
– Do not let children use the measuring
instrument unsupervised. They could
accidentally blind people.
– Do not use the measuring instrument in
a potentially explosive environment which
contains flammable liquids, gases or dust.
The measuring instrument may generate
sparks which will ignite the dust or the
vapours.
– If devices other than the operating and
adjusting devices specified here are used
or if different procedures are implemented,
this may result in a hazardous exposure to
radiation.
– Do not disable any safety devices and do not
remove any information or warning signs.
Downloaded from www.Manualslib.com manuals search engine
– Before switching on the device, check for
visible damage. Do not switch on damaged
devices.
– When using the measuring instrument on
ladders, avoid an abnormal body posture.
Ensure that you have a secure footing and
keep your balance at all times.
– If shipping the device or shutting it down for
a prolonged period, isolate the batteries or
take them out of the device.
CAUTION!
– Do not use the device in the rain.
– If the device is brought from a very cold to
a warmer environment or vice versa, you
should allow the device to acclimatise before
using it.
– If using adapters and tripods, ensure that the
device is screwed on tightly.
– If shipping the device or shutting it down for
a prolonged period, isolate the batteries or
take them out of the device.