Safety Instructions; Important Safety Information - Flex ADM 60-T Originalbetriebsanleitung

FLEX ADM 60–T
For your safety
Intended use
This measuring instrument is designed
for commercial use in industry and trade.
The laser range finder is designed for measu-
ring lengths, heights and distances as well as
for determining distances, areas and volumes.

Safety instructions

WARNING!
Read all safety instructions and other instruc-
tions to be able to work safely and securely
with the measuring instrument. Keep all safety
instructions and other instructions in a safe
place for the future.
– Do not point the laser beam at people or
animals and do not look into the laser beam.
This measuring instrument generates laser
radiation which may cause blindness.
– Have the measuring instrument repaired by
qualified technicians and with original spare
parts only. This ensures that the safety
of the measuring instrument is maintained.
– Do not let children use the measuring
instrument unsupervised.
They could accidentally blind people.
12
– Do not use the measuring instrument in
a potentially explosive environment which
contains flammable liquids, gases or dust.
The measuring instrument may generate
sparks which will ignite the dust or the
vapours.
– If devices other than the operating and
adjusting devices specified here are used
or if different procedures are implemented,
this may result in a hazardous exposure
to radiation.
– Do not disable any safety devices and
do not remove any information or warning
signs.
– Before switching on the device, check for
visible damage. Do not switch on damaged
devices.
– When using the measuring instrument on
ladders, avoid an abnormal body posture.
Ensure that you have a secure footing and
keep your balance at all times.
– If shipping the device or shutting it down
for a prolonged period, isolate the batteries
or take them out of the device.