WMF Stelio Gebrauchsanweisung Seite 10

Propulsion Unit
You can set the speed of the high-performance motor to 5 levels using the
selector switch on the propulsion unit.
The motor will operate at maximum speed for as long as you keep the
selector switch on the pulse level P. This is particularly useful when crushing
ice cubes.
Glass Jar
The closing cap in the lid can be removed by rotating it counter-clockwise.
The glass jar can be dismantled, especially for cleaning. To do so, place the
jar on the table with the opening facing down and rotate the screwed ring
counter-clockwise. You can now remove the blade assembly and the sealing
ring.
To assemble, the sealing ring is first attached to the blade assembly. When
doing so, make sure the sealing ring is properly seated on the blade assembly.
Then place the blade assembly in the glass jar. Now place the screwed ring on
the glass jar and rotate in a clockwise direction.
Note: In order to ensure the tightness of the glass jug, the threaded ring must
be screwed on tightly. The threaded ring is easier to tighten if you apply a
few drops of cooking oil on the sealing side of the glass jug (see figure).
Start-up
Clean the glass jar, lid and closing cap prior to the first use. Make sure that
you do not injure yourself on the sharp blade.
Place the selector switch on the off position 0 and set the glass jar on the
propulsion unit as shown in the diagram.
Add the first ingredients, close the glass jar with the lid and closing cap and
place the selector switch on the desired operating mode.
Note: only food with a maximum temperature of 60°C may be processed.
Speed
1 - 2
1 - 2
1 - 2
3 - 5
3 - 5
Additional ingredients may be added by removing the closing cap while the
motor is running.
10
Use
Instant drinks, soft fruits and cocktails
with alcohol
Milkshakes
Soups, milkshakes with harder fruits
Sauces, baby foods, vegetables
Nuts, hard cheese, dry bread
Maximum time
40 - 60 s
1 - 2 min
1.5 - 2 min
1.5 - 2 min
40 - 60 s