Appendices - Welch Allyn 719 Serie Gebrauchsanweisung

Instructions for use
1. Wipe the handle and charger with an appropriate health care low- or intermediate-level
cleaner/disinfecting wipe that incorporates either a 1:10 sodium hypochlorite (bleach) solution
or 70% isopropyl alcohol as the active disinfection ingredient.
2. Follow wipe manufacturer's instructions for appropriate use, contact times and applicable
warnings and precautions.
After disinfection, inspect the handle assembly for visible signs of deterioration at its switch, device
end connector, and housing. If evidence of damage or deterioration is present, discontinue use and
contact Hillrom's Technical Support department for assistance.
Disposal
Users must adhere to all federal, state, regional, and/or local laws and regulations as it pertains to
the safe disposal of medical devices and accessories.
If in doubt, the user of the device shall first contact Hill-Rom Technical Support for guidance on safe
disposal protocols.

Appendices

Specifications
Warning: No modification of this equipment is allowed.
Specifications and design may change without notice.
Item
Handle model number
Dimensions
Weight
Ingress protection
Storage/transport
WARNING Do not sterilize the 719 Series power handle, charging base, or
charger.
Specification
719XX handle
5.4" L x 1.125" Dia. (Max.) (137mm x 28.6 mm)
4.5 oz. (128 g)
IPX0
Continuous operation
Internally powered
Temperature –20°C to 49°C (–4°F to 120°F)
Relative humidity, non-condensing 10% – 95% R.H.
Atmospheric pressure 500 hPa – 1060 hP Altitude
A - English 7