Service And Customer Care - Kenwood BL740 series Handbuch

cleaning
●
Always switch off, unplug and
dismantle before cleaning.
●
Never let the power unit, cord or
plug get wet.
●
Empty the goblet before unscrewing
it from the blade unit.
●
The glass goblet can be washed in
your dishwasher.
power unit
●
Wipe with a damp cloth, then dry.
●
Wrap excess cord around the
bottom of the power unit
blade unit
1 Remove the blade unit from out of
the base by pushing up from
underneath.
2 Remove and wash the sealing ring.
3 Don't touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don't immerse the blade
unit in water.
lid
●
Remove the seal using the tab
before cleaning the lid.
●
Wash both parts by hand, then dry.
other parts
Wash by hand, then dry.
auto clean (P)
1 Pour 500ml warm soapy water in the
blender.
2 Then press the auto clean (P) for a
few seconds.
3 Rinse, then dismantle and clean the
blades as recommended under
"blade unit".
4 Dry the parts thoroughly.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
If you need help with:
●
using your appliance or
●
servicing, spare parts or repairs
Contact the shop where you bought
your appliance.
.
IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the product
must not be disposed of as urban
waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment and
health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need to
dispose of household appliances
separately, the product is marked with
a crossed-out wheeled dustbin.
4