Service And Customer Care - Kenwood BL640 Serie Handbuch

●
Smoothie recipes - never blend
frozen ingredients that has formed a
solid mass during freezing, break it
up before adding to the goblet.
mill only
Use for dry ingredients only.
hints
●
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the machine running,
pour the oil down slowly through the
hole in the lid.
●
Thick mixtures, e.g. pâtés and dips,
may need scraping down. If it's
difficult to process, add more liquid.
to use your mill
1 Put your ingredients into the jar. Fill it
no more than half full.
2 Fit the mill sealing ring into the mill
blade unit ensuring the mill seal is
fully located under the rim of the mill
blade unit. Leaking will occur if
the mill seal is damaged or
not fitted correctly. Then clip the
mill blade unit
.
Do not attempt to fit the
blender blade unit into the
mill.
3 Turn the mill base unit upside down.
Lower it into the jar, blades down.
4 Screw the mill base unit onto the jar
until it's finger-tight.
5 Place the mill onto the power unit
and turn to lock
6 Select a speed or use the pulse
control.
cleaning
●
Always switch off, unplug and
dismantle before cleaning.
●
Empty the goblet before unscrewing
it from the blade unit.
●
Do not place any parts in the
dishwasher.
(if supplied)
into the mill base
.
power unit
●
Wipe with a damp cloth, then dry.
●
Store excess cord in the storage
area at the back of the power
unit .
blade unit
1 Blender blade unit - Remove the
blender blade unit from out of the
goblet by turning clockwise to
release. Mill blade unit - Remove
the mill blade unit from out of the mill
base by pushing up from
underneath. Care should be taken
when removing the mill blade unit
from the mill base.
2 Remove and wash the sealing ring.
3 Don't touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don't immerse the
blade units in water.
other parts
Wash by hand, then dry.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
If you need help with:
●
using your machine or
●
servicing, spare parts or repairs
Contact the shop where you bought
your machine.
4