Installing The Videohub Software; Windows Installation; Mac Os Installation - Blackmagic Design Videohub Smart Control Pro Installations- Und Bedienungsanleitung

The button should quickly become red. The unit will only perform these diagnostics when it is
not selected in Videohub Hardware Panel Setup software.

Installing the Videohub Software

Videohub software runs on the latest 'Mojave' version of macOS. It also runs on the 32 and
64 bit versions of Windows 10.

Windows installation

1 Double click the installer file from the supplied media or from your downloads folder
if you downloaded the software from the Blackmagic Design website.
2 Follow the install prompts and accept the terms in the License Agreement and
Windows will automatically install the software.
Click the Windows Start button and then All Programs>Blackmagic Design>Videohub. The
following three applications are contained within the folder: Videohub Control, Videohub Setup
and Videohub Hardware Panel Setup.

Mac OS installation

1 Double click the installer file from the supplied media or from your downloads folder
if you downloaded the software from the Blackmagic Design website.
2 Follow the install prompts to complete the installation.
A folder called "Blackmagic Videohub" will be created within your Applications folder containing
the following three applications: Videohub Control, Videohub Setup and Videohub Hardware
Panel Setup.
Refer to the software sections in this manual for more information.
To install the Videohub software, double click
the installer and follow the prompts.
Getting Started 9