Switching The Appliance On And Off - hanseatic EU-KJ210G-C46 Gebrauchsanleitung

Page EN-16 Operation
Filter warning
The filter warning indicator (12)
alerts you to the fact that the filter
needs to be cleaned or replaced.
ION button
The ION button (13) resets the
filter function after the filter is re-
placed.
Sleep mode button
The Sleep mode button (14)
activates and deactivates Sleep
mode.
In sleep mode, the indicators
dim except the "Sleep" indicator
and the fan speed is at its lowest
level.
Auto mode button
The Auto Mode button (15) acti-
vates or deactivates Auto mode.
When Auto mode is on, the in-
dicators dim and the fan speed
switches to its lowest level when
the light sensor (9) registers that
the ambient light level is decreas-
ing, such as at dusk.
As the ambient light level in-
creases again (e.g. in the morn-
ing), the indicators revert to nor-
mal light levels and the fan speed
resets to its set level.
Timer button
The Timer function allows you
to set the number of hours after
which the appliance is to auto-
matically switch off. The following
settings are available: 1 hour, 2
hours, 4 hours, 8 hours.
The Timer function can be
switched on or off with the Timer
button (16).
Fan speed button
The (17) button controls the fan
speed. The settings are "Low",
"Mid", "High" and "Turbo".
Switching the appliance
on and off
• To switch the appliance on,
press the On/Off button (8).
A beep will sound. The appli-
ance switches on with the last
set fan speed.
When the appliance is
switched on for the first
time, or if it has been
disconnected from the power
supply for a long time, it starts
with the fan speed on "Low".