Maintenance; Cleaning; Disposal - Parkside PUTK 50 A1 Bedienungsanleitung

Maintenance

♦ Check that all the screw connections are sufficiently tightened at regular
intervals.
♦ If necessary, tighten all screw connections manually.
♦ All damaged screw joints should be replaced by a specialist.

Cleaning

WARNING!
► Do not use aggressive or abrasive cleaning agents, as these can damage
the outer surfaces of the product.
♦ Unfold the product to clean it (see section Use).
♦ Clean the product using a moistened cloth and a standard commercial
household detergent.

Disposal

Dispose of the product via an approved waste disposal company or your municipal
waste disposal facility. Observe the currently applicable regulations.
Please contact your waste disposal facility if you are in any doubt.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
■ 30 │ GB │ MT PUTK 50 A1