Herunterladen Inhalt Inhalt Diese Seite drucken

Use - Parkside PUTK 50 A1 Bedienungsanleitung

Transportkarre
Vorschau ausblenden Andere Handbücher für PUTK 50 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35

Use

Undo the elastic fastening bungee and unfold the product until it audibly
clicks into place (see fig. 1).
Press the knob on the handle and pull the telescopic bar out until it clicks
into place (see fig. 2).
NOTE
Place a load onto the load area. Do not stack multiple loads.
Place the load centrally on the load area.
Attach the load with the fastening bungee (see fig. 3).
Make sure that the fastening bungee is sufficiently tightened so that the load
is firmly held in place.
Also make sure that the fastening bungee is sufficiently tightened even for
small loads (see fig. 4). The arrow symbol
bungee can be hooked on.
Move the product by pulling it behind you on both wheels.
1
28 
GB │ MT
WARNING! RISK OF INJURY!
Do not stretch the fastening bungee more than the maximum usable
length of 130 cm. Keep your eyes, face and unprotected body parts
out of range of a possible springback.
The fastening bungee must be under tension to ensure that the load is
held in place. Observe the size of the load.
Never apply a load of more than 50 kg.
shows where the fastening
2
PUTK 50 A1

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis