Specification - ecoobs batcorder 3.1 Bedienungsanleitung

20~25W AC-DC Single Output Wall-mounted type

SPECIFICATION

ORDER NO.
SAFETY MODEL NO.
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER (max.)
OUTPUT
RIPPLE & NOISE (max.)
VOLTAGE TOLERANCE
LINE REGULATION
LOAD REGULATION
SETUP, RISE, HOLD UP TIME
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
INPUT
AC CURRENT
INRUSH CURRENT (max.)
LEAKAGE CURRENT(max.)
OVERLOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
ENVIRONMENT
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY &
ISOLATION RESISTANCE
EMC
(Note. 7)
EMC EMISSION
EMC IMMUNITY
MTBF
DIMENSION
OTHERS
PACKING
PLUG
CONNECTOR
CABLE
1.All parameters are specified at 230VAC input, rated load, 25
NOTE
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 20% to 100% rated load
7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives.
GS25E05-P1J GS25E07-P1J GS25E09-P1J GS25E12-P1J GS25E15-P1J GS25E18-P1J GS25E24-P1J GS25E28-P1J GS25E48-P1J
GS25E05 GS25E07
5V 7.5V
Note.2
4.0A 2.93A
0 ~ 4.0A 0 ~ 2.93A
20W 22W
50mVp-p 80mVp-p
Note.3
5.0% 5.0%
Note.4
1.0% 1.0%
Note.5
5.0% 5.0%
Note.6
500ms, 20ms, 50ms/230VAC
90 ~ 264VAC 135 ~ 370VDC
47 ~ 63Hz
78.5% 81.5%
0.7A / 100VAC
45A / 230VAC
0.25mA / 240VAC
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
105 ~ 135% rated output voltage
Protection type : Clamp by zener diode
0 ~ +50 (Refer to "Derating Curve")
20% ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH
0.03% / (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
TUV EN60950-1 approved
I/P-O/P:4242VDC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022, EN61000-3-2,3
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
500Khrs min. MIL-HDBK-217F(25 )
79*54*33mm (L*W*H)
210g ; 60pcs / 13.5kg / CARTON
See page2
See page2
Features :
Universal AC input / Full range
No load power consumption<0.3W
ErP step2 compliant
Meet EISA 2007 (Energy Independence and Security Act)
2 pole EURO plug
Class power (without earth pin)
Protections: Short circuit / Overload / Over voltage
Fully enclosed plastic case
LED indicator for power on
Approvals: TUV / CB / CE
Pass LPS
2 years warranty
GS25E09 GS25E12 GS25E15
9V 12V 15V
2.77A 2.08A 1.66A
0 ~ 2.77A 0 ~ 2.08A 0 ~ 1.66A
25W 25W 25W
80mVp-p 80mVp-p 100mVp-p
5.0% 3.0% 3.0%
1.0% 1.0% 1.0%
5.0% 3.0% 3.0%
500ms, 20ms, 15ms/115VAC at full load
82.5% 84.5% 84.5%
70% RH ambient.
G S 2 5 E
GS25E18 GS25E24 GS25E28
18V 24V 28V
1.38A 1.04A 0.89A
0 ~ 1.38A 0 ~ 1.04A 0 ~ 0.89A
25W 25W 25W
150mVp-p 180mVp-p 240mVp-p
3.0% 2.0% 2.0%
1.0% 1.0% 1.0%
3.0% 2.0% 2.0%
84.5% 85.5% 85.5%
File Name:GS25E-SPEC 2011-06-14
s e r i e s
GS25E48
48V
0.52A
0 ~ 0.52A
25W
240mVp-p
2.0%
1.0%
2.0%
87%