Dell Latitude 7410 Einrichtung Und Technische Daten Seite 36

Table 36. System setup options—Power Management menu (continued)
Power Management
Enable Intel Speed Shift Technology
Lid Switch
Table 37. System setup options—Wireless menu
Wireless
Wireless Switch
WLAN
Bluetooth
Wireless Device Enable
WLAN
Bluetooth
Table 38. System setup options—POST Behavior menu
POST Behavior
Numlock Enable
Enable Adapter Warnings
Extend BIOS POST Time
Fastboot
Fn Lock Options
Lock Mode
Pull Screen Logo
Warnings and Errors
36 System-Setup
Enables or disables Intel Speed Shift Technology support which enables the operating
system to select the appropriate processor performance automatically.
Default: ON.
Enables the computer to power up from the off state whenever the lid is opened.
Default: ON.
Determines which wireless devices can be controlled by the Wireless Switch. For
Windows 8 systems, this is controlled by an operating system drive directly. As a
result, the setting does not affect the Wireless Switch behavior.
NOTE: When both WLAN and WiGig are present, enable/disable controls
are tied together. Thus, they cannot be enabled or disabled
independently.
Default: ON.
Default: ON.
Enable or disable internal WLAN/Bluetooth devices.
Default: ON.
Default: ON.
Enables or disables Numlock when the computer boots.
Default: ON.
Enables the computer to display adapter warning messages during boot.
Default: ON.
Configures the BIOS POST (Power-On Self-Test) load time.
Default: 0 seconds.
Configures the speed of the UEFI boot process.
Default: Thorough. Performs complete hardware and configuration initialization during
boot.
Enables or disables the Fn lock mode.
Default: ON.
Default: Lock Mode Secondary. Lock Mode Secondary = If this option is selected, the
F1-F12 keys scan the code for their secondary functions.
Enabled or disabled the computer to display full screen logo if the image match
screen resolution.
Default: OFF.
Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt and wait for user input when
warnings or errors are detected.