Initial Operation - Gardena 19031 Betriebsanleitung

3. INITIAL OPERATION

To insert batteries:
7
To connect the Water Control:
12
Downloaded from www.Manualslib.com
The batteries are not included in the scope of delivery.
The Water Control must only be operated with 3 x alkalimanganese
(alkaline) batteries type LR6 (AA) (Mignon).
Under normal conditions of use, the service life is six months
(2 x app query per day).
1. Press the tab
2. Remove the battery holder
3. Insert batteries into the battery holder
that the polarity
4. Push the battery holder
5. Close the cover
6
5
ß
P
The Water Control is fitted with a sleeve nut
(33.3 mm) thread. The adaptor supplied
to be connected to taps with a (G 3/4") (26.5 mm) thread.
8
1. For tap with a G 3/4" (26.5 mm) thread:
Screw adaptor
9
2. Screw sleeve nut
by hand (do not use pliers).
3. Screw tap connector
0
manuals search engine
CAUTION!
Rechargeable batteries should not be used!
(5)
and open the cover
(7) .
ß
is correct.
P
(7)
back into the battery compartment.
(6)
.
(8)
on to the tap manually (do not use pliers).
(9)
of the Water Control on to the adaptor thread
(10)
on to the Water Control.
(6)
.
(7) . In doing so, ensure
(9) for taps with (G 1" )
(8) allows the Water Control