Cleaning The Condenser - Electrolux TWSL5E300 Benutzerinformation

20 www.electrolux.com
display and you must empty the water
container.
To empty the water container:
1. Pull the water container out keeping
2. Pull the plastic connection out and
3. Push the plastic connection back in
4. To continue the programme press

11.3 Cleaning the condenser

If the symbol
(Kondensator) flashes on the display,
inspect the condenser and its
compartment. If it is dirty, clean it. Do the
check not less than once a 6 months.
To inspect:
Downloaded from www.Manualslib.com
it in a horizontal position.
drain the water into a basin or
equivalent receptacle.
and place the water container back
into position.
the Start/Pause button.
condenser
WARNING!
Do not touch the metal
surface with bare hands.
Risk of injury. Wear
protective gloves. Clean
carefully to avoid damaging
the metal surface.
manuals search engine
1. Open the door. Pull the filter up.
2. Open the condenser cover.
3. Turn the lever to unlock the
condenser lid.
4. Lower the condenser lid.
5. If necessary, remove the fluff from
the condenser and its compartment.
You can use a wet cloth and/or a
vacuum cleaner with a brush