Clock Functions; Setting The Duration - AEG BPB331021B Benutzerinformation

10 www.aeg.com
Button
5.6 Heat-up indicator
When you activate an oven function, the
bars in the display

6. CLOCK FUNCTIONS

6.1 Clock functions table
Clock function
6.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press
2. Press
The display shows
hour. "00" flashes.
3. Press
Downloaded from www.Manualslib.com
Function
PLUS
come on one by
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
00:00 COUNT UP TIMER
or to set the hours.
to confirm and switch to set
the minutes.
and the set
or to set the current
minutes.
manuals search engine
Description
To set the time.
one. The bars show that the oven
temperature increases or decreases.
Application
To show or change the time of day. You can change the
time of day only when the appliance is off.
To set how long the appliance operates. Use only when
an oven function is set.
To set when the appliance deactivates. Use only when
an oven function is set.
To combine DURATION and END function.
Use to set a countdown time. This function has no ef-
fect on the operation of the appliance. You can set the
MINUTE MINDER at any time, also if the appliance is
off.
If you do not set any other clock function the COUNT
UP TIMER automatically monitor how long the appli-
ance operates. It is on immediately when the oven
starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END.
4. Press
day will be saved automatically after
5 seconds.
The display shows the new time.
and
To change the time of day press
again and again until the indicator for the
time of day

6.3 Setting the DURATION

1. Set an oven function.
2. Press
starts to flash.
to confirm or the set time of
flashes in the display.
again and again until