Removal Of Parts; Technical Specifications; Structure; Drive - Lopital Reflex Benutzeranleitung

7. Removal of parts

All parts that are replaced or removed can be sent back to Lopital BV. You may also offer
the parts to the engineer for destruction. We will ensure that all parts are processed in
an environmentally-friendly manner.
If you take care of disposal of the product yourself, you must take account of the fact
that batteries and chargers must be disposed of as small chemical waste.
8. Technical specifications
The Reflex Shower-toilet chair belongs to category 'BF'.
The Reflex Shower-toilet chair is a class 2 EMC product.
The Reflex is splash proof; this means that the Reflex can be used under the shower.
This is given with instruction IPX4.

8.1. Structure

Frame:
Hinge points:
Wheels:
Body support :
Weight:
Maximum permitted load:
Weight comfort leg support:

8.2. Drive

Drive:
Battery:
Charger:
Stainless steel and steel tubes and plates that are
equipped with a 2-layer powder coating
Stainless steel, cover caps made of plastic V0
Plastic, Ø 12.5 cm / 4.9 inch, double blocking facility
PUR (polyurethane).
53 kg / 117 lbs
135 kg / 300 lbs
3.6 kg / 8 lbs per unit
Actuator 24V
Stainless steel spindles for high / low movement
24V actuator for tilt adjustments
Battery capacity 7Ah
110-240V AC, 50-60Hz, max. 0,35A, cable length 1.5 m.
Reflex Shower-toilet chair | Instructions for use | 45