Activating; Working With The Reflex - Lopital Reflex Benutzeranleitung

2.2. Activating

Before you can use the Reflex, you must activate it by pressing both up arrows for 2
seconds (See figure 1).
2.3. Working with the Reflex
Step 1
Disconnect the Reflex from the charger if necessary.
Step 2
Activate the Reflex (See paragraph 2.2. Activating).
Step 3
Fold the armrests up or turn the front closure downwards (See paragraph 3.3. Armrests
with front closure).
Step 4
If necessary, fold the foot plates up or remove the footrests from the Reflex
(See paragraph 3.2. Footrests).
Step 5
The Reflex must be put on the brakes before transferring persons (See paragraph
3.1. Wheel blocking).
Step 6
The client can take a seat in the chair. Support the client if necessary.
Step 7
Place both feet on the footrests and calves against the calf-supports (See paragraph
3.2. Footrests).
Step 8
Close the armrests once the client has taken a seat in the chair (See paragraph
3.3. Armrests with front closure).
Step 9
Notify the client about the processes you will be carrying out.
Reflex Shower-toilet chair | Instructions for use | 33