Tilting; Toilet Function; In Combination With Toilet - Lopital Reflex Benutzeranleitung

3.6. Tilting

• The Reflex is equipped with a backwards tilting function of up to
30 degrees. This function is operated by pushing the button that
shows an arrow pointing backwards. The chair will then tilt (See
figure 20).
• You must put the Reflex on the brake before using the tilt function.
• When the chair reaches the maximum tilting angle, the movement
will automatically stop. The carer can stop the movement at any
moment by releasing the button.
• In order to tilt the Reflex forwards again, the button with the arrow
pointing forwards must be used (See figure 21).
• Once the chair is back in the horizontal position, the movement will
automatically stop.
• During tilting, the front closure must be closed and the client must rest their arms on
theappropriate armrest.
• During tilting, maintain contact with the person in the chair.
Before tilting the chair, check to ensure there are no persons or objects in the
vicinity of the chair.

3.7. Toilet function

3.7.1. In combination with toilet

• The Reflex can also be moved over the toilet.
• Remove the inlay on the seat before the person sits down in the chair.
• Once the person has taken a seat and the armrests are closed, the carer must move
the Reflex to the appropriate height.
• Move the Reflex, if necessary, upwards or downwards to achieve the right position.
• The Reflex can now be moved backwards over the toilet.
• Lower the Reflex, if necessary, to achieve the right position.
The Reflex does not fit over every toilet.
Reflex Shower-toilet chair | Instructions for use | 39
Figure 20 Tilting
backwards.
Figure 21 Tilting
forwards.