Ebode IPV38P2P Schnellstartanleitung Seite 5

Shortcut icon Windows OS
Note: If your computer does not have a CD drive, you can download the IP Camera Tool
from the ebode electronics website (www.ebodeelectronics.eu) for free.
3. Access the Camera
1. Enable the DHCP feature of your router (enabled by default normally), then open the
IP Camera Tool program which you have dragged to your desktop in the previous step. It
should display the camera's IP address in your LAN (Local Area Network). Please make
sure the camera is connected to the same LAN as your computer.
2. If everything is connected right you should see your camera in the IP Camera Tool as
shown in the above image. Please click the camera and your default browser will open up
to the camera's login page (as below). When logging in for the first time, you will need to
download and install the IPCWebComponents. Internet Explorer example is shown below.
For Google Chrome, MAC OS Safari, or Mozilla Firefox, please refer to the User Manual.
Note: It does not support 64-bit browser.
25-8-2014
Shortcut icon Mac OS
- 5 - ebode IPV38P2P