Ebode IPV38P2P Schnellstartanleitung Seite 12

3. Configure port (HTTPS port) forwarding on your router. Again this is an advance step,
for these steps, we will be using the TP-LINK brand wireless router as an example. First,
we need go to the "Forwarding -Virtual Servers" panel for setup. For other brands, you
can check the user guide or user manual of the router, or consult the manufacturer.
HINT: For other router brand examples please refer to www.portforward.com
You can see the port of your camera here. If you want to set Remote
Access for several cameras on the same network, you will need to
change the HTTPS port for each camera.
Click Add
New
Input the port and IP
address of your camera
and click Save.
25-8-2014 - 12 - ebode IPV38P2P