Ebode IPV38P2P Schnellstartanleitung Seite 11

Note: For Belgian users, please download the document "Telenet Modem Instructions"
from the CD or from our ebode electronics website.
2. Enable UPnP and DDNS in the camera's settings page. We recommend you to use the
IPCAM DDNS by factory default, but if you want to use the third party DDNS, please check
the user manual for further instructions.
25-8-2014
Select Yes and click Save.
Click Enable DDNS and click Save. The content in
the Manufacture's DDNS column is the domain
- 11 -
IP Address: Set this in the
same subnet as your
computer or keep it as
default. Subnet Mask: Keep it
as default. Gateway and DNS
Server: Set it to the IP
address of your router.
Input the Username and
password, click OK.
name of your camera.
ebode IPV38P2P