Ebode IPV38P2P Schnellstartanleitung Seite 10

2. Run the APP and go to IPC management page, click QR scan button. Scan the QR
code on the bottom label of your camera.
2.Click here.
1.Click here.
3. In the result page, input the Username and Password of your camera, then you can
see your camera in the list, click it to connect and enjoy the live video.
By DDNS: if you want to access your camera by a computer.

1. Run the IP Camera Tool, and assign a static IP address for your camera. Please note
this is a step for advanced users. By default your modem / router does not have a static
IP range. This static IP range needs to be configured first. Please refer to the manual of
your modem / router or contact your ISP. Please note that if you do not setup a static
range in your modem / router, you might get network IP conflicts.
Right click your camera
and click Network
Configuration.
25-8-2014
If you scan a QR code at the bottom
of the camera successfully, the UID
will be displayed automatically.
Default username is admin with no
password.
Click OK.
- 10 - ebode IPV38P2P