Magicvac P0519ED Betriebsanleitung Seite 13

- Press the VAC & SEAL key (1C) to perform the packing cycle. Wait for the VAC SEAL led (1C) to switch off.
- Press the LOCK/UNLOCK Buttons (2) (fig H) to be able to open the Cover (5).
- Lift the lid and turn it in the open position.
- Check the quality of the seal obtained, which should appear as a regular, wrinkle-free crosswise strip with no
internal ridges in the bag. (fig. B)
- The packaging cycle already started can be interrupted at any time by pressing the STOP key (1D).
7 Vacuum packing in Executive containers or in containers sealed with Universal Caps
ATTENTION: Only use MAGIC VAC® canisters since they are resistant to the vacuum created by the Mod. P0519ED,
while other types of canisters could implode due to the vacuum created by the machine and cause injury.
Executive containers and the Universal Caps with star-shaped knob (see fig. L) make vacuum packing easier,
because the connection hose can be directly introduced into the knob central hole.
Universal Caps, available in two diameters (100 mm and 125 mm), are to be used on jars for preserving food
and bowls and receptacles made of tempered glass. The Universal Caps work just like the Caps for Executive
containers.
WARNING: When using Universal Caps do not use plastic or glass containers that are not suitable since they
could implode under the vacuum pressure of the appliance and cause injury.
- Fill the container leaving at least 3 cm of room between the contents and upper rim. Place the lid on the
container and turn the knob to the "VACUUM" position (fig. L).
- Connect the container lid knob to the appliance air inlet (15) by means of the connection hose (fig. L).
- Press the VAC button (4) and the machine will create vacuum and switch off when the operation has been
completed.
- Remove the hose from the container lid knob.
- Turn the knob to the "CLOSED" position.
- To open the containers turn the knob to the "OPEN" position, you should hear a hissing of air as it enters the
container. This sound guarantees that the contents have been packed in a vacuum.
8 Vacuum packing in Family containers
Multipurpose containers ideal for storage of frequently used products such as dry and fragile foods; powder
foodstuffs; fresh, pureed or strained fruit and vegetables. Their transparency and design makes them attractive
to display on kitchen shelves while ensuring that their contents are clearly visible.
- Fill the container leaving at least 3 cm of room between the contents and upper rim and position the cap on
the container.
- Connect the container lid to the air inlet (3) of the appliance (fig. M and fig. N) by means of the connection
hose (15).
- Press the VAC button (4) and the machine will create vacuum and switch off when the operation has been
completed.
- Remove the hose from the container lid.
- To open round canisters, press the center button, to open square canisters, first press the release (16) and
then open the safety closure (fig. M).
9 Vacuum packing in glass jars sealed with metal caps (Leifheit type)
Use the cap attachment to pack foods in glass jars with a metal cap.
- Fill the container leaving at least 3 cm of room between the contents and upper rim.
- Connect the cap attachment (17) to the air inlet (3) of the appliance by means of the connection hose (15).
Place the cap attachment directly on the jar with the metal cap only (18) and press down, making sure it fits
correctly. (fig. O)
- Press the VAC button (4) and the machine will create vacuum and switch off when the operation has been
completed. Make sure that the cap attachment holds firmly by keeping it pressed with your hand.
- Disconnect the hose from the cap attachment. Remove the cap attachment from the jar.
- Apply the ring (19) supplied with the jar and screw it down all the way (fig. O).
- To open a glass jar vacuum-sealed with a metal cap, use the cap opener provided (the side with writing
should be turned up). Position the cap opener as shown in (fig. P) and gently pry open the cap until the
vacuum is released. Remove the metal cap. This accessory allows you to reuse the cap.
10 Vacuum packing with bottle caps
The Bottle Cap may be used to seal partly filled bottles of wine or non-fizzy beverages. Using the Bottle Cap
will allow you to create a vacuum inside the bottle so as to slow down oxidisation and preserve the freshness
and flavour of its contents for a longer time.
- By means of the connection hose (15) connect the air inlet (3) of the appliance to the Bottle Cap (20) (fig. Q).
Press the Cap firmly into the bottle.
- Press the VAC button (4) and the machine will create vacuum and switch off when the operation has been
completed.
- Disconnect the hose from both the Bottle Cap and the appliance immediately.
- To open a bottle sealed with the Bottle Cap, simply pull the cap out of the bottle. You will hear the air rushing
into the bottle.
11 Vacuum packing with the cap attachment in Executive containers or in containers sealed with
Universal Caps with the previous model of knob
To use the Cap Attachment in Executive containers or in containers sealed with Universal Caps with the previ-
12