General Safety Instructions - Status OS300/150 Originalanleitung

1
8
7
9
6
2
5
OS300/150
1
2
3
5
4
10
3
1. INTRODUCTION / GENERAL SAFETY RULES
INTRODUCTION
• This tool is intended for dry sanding and finishing of wood, painted surfaces, plastic
and filler
• This tool is not intended for professional use
• Read and save this instruction manual
TECHNICAL SPECIFICATIONS - TOOL ELEMENTS (Fig 1)
1. Power supply cable
2. Main handle
3. ON/OFF switch
4. Air vents
5. Dust box

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term "power tool" in the
warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
• Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Unmodifed plugs
and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use an earth leakage cir-
cuit breaker. Use of an earth leakage circuit breaker reduces the risk of electric shock.
6. Vibrating plate / backing plate
7. Electronic speed regulator
8. Upper handle
9. Abrasive support
10. Rotation direction arrow
3
EN