Weidmuller WAVE Serie Beipackinformation Seite 11

3. Mounting
Die The analogue signal isolators are mounted on standard TS 35 rails.
4. Electrical connection
Terminal assignments
1 Input current loop +
2 Not assigned
3 Input current loop –
4 Not assigned
5 Not assigned
6 Not assigned
7 Output 1 current loop +
8 Not assigned
9 Output 1 current loop -
10 Output 2 current loop +
11 Not assigned
12 Output 2 current loop -
Wire cross-section max. 2.5 mm
Multi-wire conncection max. 1 mm
(two wires with same cross-section)
Operating temperature 0 °C ... +55 °C
Warning! For applications with high isolation voltages, take measures to
prevent accidental contact and make sure that there is suffi-
cient distance or insulation between adjacent devices!
2
2
10 11 12
9
7 8
1 2 3
4 5 6
9