Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Advanced functions
Antenna system configuration
The factory settings provide that the satellite system can receive signals simultaneously
from 2 satellites via DiSEqC switch, HotBird 13° East in first position and Astra 19.2° East
in second position. If the system does not correspond to the settings indicated, it is
necessary to modify the default settings to make them consistent with the satellite dish
used.
NOTES AND WARNINGS
The TV is compatible with single universal, multi-satellite DiSEqC 1.0 and multi-user
SCR/Uni-cable systems. Motorized antennas (DiSEqC 1.2 and USALS) are not supported.
Incorrect antenna configuration may result in some or all channels not being loaded. If you
do not know the characteristics of your antenna system and/or you are not able to configure
the receiver yourself, it is advisable to contact a trusted professional installer.
The Signal and Quality Level indicators refer to the transponder of the selected satellite
indicated on the screen. Make sure that it is valid/updated and actually active.
It is not recommended to avoid connecting the TV to the satellite signal through the pass-
through antenna connector (LNB Out / Loop Through) of an external satellite receiver as
both devices cannot operate simultaneously. When the TV is switched on, the receiver must
be in standby (with the tuner not powered) and vice versa.
Factory reset (reset)
It is possible to reset the entire television, returning all the settings to the initial condition.
To do so, select Settings> Reset in the Home menu (connected Smart/TV mode) and
confirm. Another way to do this is: Home> Settings> Other Settings > Common Settings>
System Restore .
WARNING
Restoring the factory settings deletes all the customizations made by the user, including
stored channels, downloaded applications and changed settings. Furthermore, by
confirming the reset, the TV will perform a complete system rebook and then display the
first installation wizard on the screen.
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
