Tele System SMART40 SC10 T2S2HEVC Bedienungsanleitung Seite 10

TELE System
and set Digital SAT (satellite) as Antenna Type. Obviously to return to the terrestrial channel
list, set Digital terrestrial as Antenna Type. The TV will create a channel list with the defined
ordering (e.g. the LCN one, corresponding to the numbering requested by the terrestrial
channel broadcasters) once TV has scanned the frequencies. If you want to scan channels
from a different input/antenna, then proceed as just described above by selecting the
corresponding Antenna type (a different one from the previous). The various available
channels list will then be accessible only if the TV is in the correct TV section
(terrestrial/cable/ satellite). In particular, to switch from viewing a terrestrial channel to a
satellite channel, press the MENU button, enter the Channel menu, and set the Antenna
Type to Digital SAT (satellite). If you want to return to the terrestrial channel list, set the
Antenna Type back to Digital terrestrial .
Smart (Home) mode
The Home menu, also directly accessible from the HOME key on the remote control, mainly
allows access to the so-called Smart section (connected component/IP) to manage and use
the IP applications and the browser for navigation, as well as access to the various sources
of input/mode.
APPS selection
Moving to the APPS section of the Home menu, you can see the list of all IP applications
installed under the Application List (accessible directly from the APP button on the remote
control), where you can also access the application store to download and install new ones.
The Multimedia submenu on the other hand allows access to the Multimedia player function
(Media player), to reproduce multimedia audio/video contents saved on an external USB
memory device or to manage files saved in the internal TV storage (e.g. installation of APK
expert users, a procedure recommended only for expert users).
Settings section
The submenu to configure the connection to the Internet (via LAN cable or via Wi-Fi) is
particularly important. This submenu is essential to use the connected Smart/TV functions
and can be reached from the path: Home Menu> Settings> Other Settings > Network . It is
useful if you want to change the network settings defined during initial installation. In the
Time settings submenu to adjust the time and
Other Settings menu, you will also find:
related parameters, the Common Settings submenu for general changes such as
language, keyboard type, permissions/account management and finally the Info submenu
to consult technical system information such as the MAC addresses of the Ethernet/LAN
and Wi-Fi interfaces.