Abus TVAC26030 Installationsanleitung Seite 38

PTZ menu
Multi/Single view
Preset
Patrol
Camera channels
Zoom
Focus
PTZ menu
Multi/Single view
Preset
Patrol
Changing camera channels
Zoom
Focus
Control layout DVR
Enter the PTZ menu by pressing the IRIS
button while the camera is in full screen mode
and then pressing the OK button or the
button on the joystick
Camera in full screen - IRIS- - OK/button on
joystick
With the FOCUS- button you can switch
between the different views
You recall presets by pressing the preset
number and then the PRESET button
To recall the Patrol press 35-38 and then press
PRESET
Preset 35 => Tour 1
Preset 36 => Tour 2
Preset 37 => Tour 3
Preset 38 => Tour 4
By pressing the keys 1-9 you can switch
between the different channels
You can use the zoom by turning the joystick
or with the Zoom+/Zoom- buttons
You can adjust the focus using the
Focus+/Focus- buttons
Control layout NVR
Enter the PTZ menu by pressing the IRIS
button while the camera is in full screen mode
and then pressing either the OK button or the
joystick button
Camera in full screen - IRIS- - OK/button on
joystick
Use the FOCUS button to switch between the
different views
Recall presets by pressing the preset number
and then the PRESET button
To recall the Patrol press 35-38 and then press
PRESET
Preset 35 => Tour 1
Preset 36 => Tour 2
Preset 37 => Tour 3
Preset 38 => Tour 4
By pressing the buttons 1-9 you can switch
between the different camera channels.
You can use the zoom by turning the joystick
or with the Zoom+/Zoom- buttons
You can adjust the focus using the
Focus+/Focus- buttons
15