Electrolux FQP95XEV Benutzerinformation Seite 10

10 www.electrolux.com
• Do not open the appliance door when
• Open the appliance door with care
1. Open the oven door.
2. Fill the cavity embossment with tap
3. Put food in the appliance and close
4. Set the True Fan Cooking PLUS
5. Press the Plus Steam button
The indicator turns on.
6. Turn the knob for the temperature to
7. To deactivate the appliance, press
5.6 Display
Downloaded from www.Manualslib.com
the function True Fan Cooking PLUS
operates, with the exception of
preheating.
after the True Fan Cooking PLUS
function stops.
Refer to "Hints and tips"
chapter.
water.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
the oven door.
function: .
The Plus Steam button works only
with the True Fan Cooking PLUS
function.
select a temperature.
CAUTION!
Do not refill the cavity
embossment with water
during cooking or when
the oven is hot.
the Plus Steam button
A
G F E
manuals search engine
knobs for the oven functions and
temperature to the off position.
The indicator of the Plus Steam button
turns off.
8. Remove water from the cavity
embossment.
5.5 Fast heat up function
The fast heat up function decreases the
heat up time.
1. Set the fast heat up function. Refer to
.
the Oven functions table.
2. Turn the knob for the temperature to
set the temperature.
An acoustic signal sounds when the
appliance is at the set temperature.
3. Set an oven function.
, turn the
A. Timer
B C
B. Heat-up and residual heat indicator
C. Water drawer (selected models only)
D. Core temperature sensor (selected
models only)
E. Door lock (selected models only)
F. Hours / minutes
D
G. Clock functions
WARNING!
Make sure that the
appliance is cool before
you remove the
remaining water from the
cavity embossment.
Do not put food in the oven
when the Fast heat up
function operates.
The fast heat up function
does not deactivate after the
acoustic signal. You must
deactivate the function
manually.