Safe Handling; Product Description; Package Includes; Components Required For Operation - B. Braun Aesculap Suhl Favorita Hybrid Gebrauchsanweisung/Technische Beschreibung

1.

Safe handling

DANGER
Prior to use, check that the product is in good
working order.
Observe our "Notes on Electromagnetic Compati-
bility (EMC)".
To prevent damage caused by improper setup or
operation, and in order not to compromise war-
ranty and manufacturer liability:
– Use the product only according to these instruc-
tions for use.
– Follow the safety and maintenance instructions.
– Ensure the manufacturer's approval before using
accessories that are not mentioned in the instruc-
tions for use.
Ensure that the product and its accessories are
operated and used only by persons with the requi-
site training, knowledge, or experience.
Keep the instructions for use accessible for the
user.
Always adhere to applicable standards.
Ensure that the electrical facilities in the room in
which the device is being used conform to IEC
norms.
Unplug the device by pulling the plug, but never by
pulling the power cord.
Do not operate the product in explosion-hazard
areas.
Do not use the product if it is damaged or defec-
tive. Set aside the product if it is damaged.
Downloaded from www.Manualslib.com
Risk of fatal injury from electric
shock!
Do not open the product.
Connect the product only to a
grounded power supply.
manuals search engine
2.

Product description

2.1 Package includes

Designation
Clipping machine Favorita Hybrid
Clipping machine FAV5 Hybrid
Adapter with power supply for
hybrid clipping machines
Instructions for use
Note
The shearing head for clipping machine Favorita Hybrid
is not included in the scope of delivery.

2.2 Components required for operation

• Clipping machine Favorita Hybrid/FAV5 Hybrid
• Shearing head
• Adapter with power supply
2.3 Intended use of clipping machine
Favorita Hybrid/FAV5 Hybrid
The clipping machine Favorita Hybrid/FAV5 Hybrid is
used for shearing small animals.
The clipping machine Favorita Hybrid/FAV5 Hybrid is
used with a shearing head to be selected according to
the respective application.
Art. no.
GT200
GT300
GT207
TA013659
3