Clipping machine Favorita Hybrid/FAV5 Hybrid
4.3 Handling shearing head Favorita
Hybrid
4.3.1 Adjusting the plate pressure
Note
The plate pressure can be adjusted to increase the cut-
ting power as required.
Tighten knurled screw 8 so that upper cutting
plate 12 can be moved by hand, by applying mod-
erate, lateral pressure.
4.3.2 Removing the shearing head
WARNING
Loosen knurled screw 8 with leaf spring 9.
Push upper cutting plate 11 under pressure piece 7
out of the shearing head.
This completes the disassembly of the shearing
head.
6
Downloaded from
www.Manualslib.com
Aesculap Suhl
Risk of injury caused by sharp cut-
ting plates!
Handle the shearing head of
clipping
machine
Hybrid with appropriate caution.
manuals search engine
4.4 Handling shearing head FAV5
Hybrid
4.4.1 Changing the shearing head
WARNING
Favorita
15
Fig. 3
Press ON/OFF switch 5 to switch off clipping
machine FAV5 Hybrid.
Press shearing head lock 15, see Fig. 3.
Risk of injury caused by sharp cut-
ting plates!
Handle the shearing head of
clipping machine FAV5 Hybrid
with appropriate caution.