Battery Status Light; Functions And Feedback On The Parent Unit; Talk Function - Philips AVENT SCD506/05 Bedienungsanleitung

Battery status light

The battery status light is solid green when the baby unit is operating on battery power and the
batteries contain enough energy.
The battery status light flashes red quickly when the batteries run low while the baby unit is operating
on battery power (Fig. 18).
Note: The battery status light is off when the baby unit is powered by the adapter.
Replace the batteries when they run low.

Functions and feedback on the parent unit

Volume
There are five volume levels and a 'volume off' setting.
Setting the volume level
1 Press the + button or the - button once.
The sound level lights show the current volume (Fig. 19).
2 Press the + button to increase the volume or press the - button to decrease the volume.
3 If you do not press a button for more than 3 seconds, the sound level lights go out and the setting
is saved.
Volume off
Below the lowest volume setting, there is a 'volume off' setting.
1 Press the + button or the - button once.
The sound level lights show the current volume.
2 Press and hold the - button for more than 3 seconds to set the volume to off.
Note: The sound level lights always show that the baby produces sounds, even if the volume is set to
off.

Talk function

1 If you want to comfort your baby, press the TALK button on the parent unit and talk clearly into the
microphone on the front from a distance of 15-30cm (0.5-1ft) (Fig. 20).
The 'link' light starts flashing green.
Note: If you have set the volume for the lullaby higher on the baby unit, the sound will also be
louder when you use the talk function on the parent unit.
2 Release the TALK button when you have finished talking.
Battery status light
When the rechargeable batteries of the parent unit are low, the battery status light flashes red and the
parent unit beeps (Fig. 21). The remaining operating time is at least 30 minutes.
When the rechargeable battery of the parent unit is almost empty, the battery status light flashes red.
If you do not connect the parent unit to the mains to charge it when the battery status light flashes
red, the parent unit switches off.
English
11