BEARWARE 303394 Bedienungsanleitung Seite 23

Low battery:
Channel display
The weather station receives the signal of the outdoor sensor
automatically after all settings have been configured. You can
switch between the different channels using the "CH" button.
Press and hold the "CH" button to start the search for the
outdoor sensor. The channels of the outdoor sensor can be
selected directly on the sensor using a toggle switch. Select the
desired channel on the outdoor sensor and start the search on
the base station on the corresponding channel.
English
If the battery symbol appears, then the inserted
batteries are empty and should be replaced with new
batteries. This applies to the outdoor sensor (battery
indicator in "Outdoor Temp" range) as well as to
the base station (battery indicator in "Indoor Temp"
range).
Outdoor temperature display:
The outdoor temperature is measured by the outdoor sen-
sor and shown up to one tenth of a degree. The configured
temperature unit is shown to the right of the measured
value. The temperature unit can be changed between
°C and °F. Press the "Down" button on the front of the
weather station.
23