Correction Of The Current Number Of Persons Present - FIESSLER RAZL-2CO Handbuch

People Counter RAZL-2CO (Translation)

2.15 Correction of the current number of persons present

Make sure that the persons always enter and exit individually.
If several persons pass through the sensor pillar at the same time, or too close together, it is not possible to detect the persons correctly. In
this case only one person may be recorded and counted!
If possible, access should be limited in width so that people can only pass the columns one by one. If necessary, this can be done with barrier tapes, for
example.
If people pass the pillars at the same time, the current number of people can be corrected.
A correction of the current number of persons present can be made using the fields -1 and +1.
Alternatively, a correction of the current number of persons present can be entered in the configuration.
Correction of the number of persons
via the fields -1 and +1
Fiessler Elektronik GmbH & Co. KG
Buchenteich 14, D-73773 Aichwald
Correction of the number of persons
via the configuration menu
-28-
Phone: +49 (0)711 - 91 96 97 - 0
Fax: +49 (0) 711 - 91 96 97 - 50
Internet: http://fiessler.de
E-Mail: info@fiessler.de