TDK-Lambda CUS150M Handbuch Seite 14

CUS150M Handbook
Level of Insulation:
Dielectric Strength type testing is carried out as follows:
Primary mains circuit to earth: 2.5 kVdc.
Primary mains circuits to secondary: 6.25 kVdc
Secondary circuits to earth: 2.5 kVdc.
Safety Approvals:
UL60950-1 and CSA22.2 No.60950-1 - UL Recognised. C-UL for Canada.
IEC/EN60950-1 – CE mark.
CE marking when applied to any CUS150M product, indicates compliance with the Low Voltage Directive
in that it complies with EN62368-1 and with the RoHS Directive.
UL/CSA 60601-1/ANSI/AAMI ES 60601-1 - UL + C -UL approval
IEC/EN/UL 62368-1
Fusing:
Internal Dual fuses (F1 and F2) in the live and Neutral line, T3.15AH, 250V. (Standard CUS150M)
Internal Single fuse (F1) in the live line, T3.15AH, 250V. (Option /E)
Symbols:
AC EARTH
Caution: See instructions for use
Unit Nomenclature
Note: All output voltages/variants may not be available as standard units, refer to datasheet for standard
product range. These (and other variants) may be available as non-standard or custom units, please
contact our sales team for details.
CUS150M models as described below:
Units may be marked with a Product Code: CUSZ-xxVx/yyyy where Z is 150M where x may be any number of
numbers or left blank to indicate the output voltage. V represents a decimal place or can be left blank as
required. y can be any number of numbers or letters (excluding M, E, U, A, F, B, H) when indicating non-safety
related model differences. y can be M, E, U, A, F, B, H when indicating the standard options as listed below.
Unit Product Code may be prefixed by K, SP and/or NS # followed by / or - (where # may be any number of
characters indicating non-safety related model differences).
Unit Product Code:
CUSZ-xxVx/yyyy
Where:
Z = 150M for 150W model. (May be followed by 'D' for DC input)
xxVx = Channel 1 output voltage within the output voltage adjustment range from the
Output Parameters Table below.
yyyy = Unit options from list of standard unit options below, or non-safety related model differences.
/M = Molex connectors
/E = Single fuse in the live line
/U = U chassis
/A = Cover and U chassis
/F = Top fan, cover and U chassis
/B = Baseplate
/H = alternate link wire and discharge resistors (60335-1 compliant, 60950-1 and 62368-1
approved only)
N L
Neutral Live
Page 14 of 25
Warning: Dangerous Voltage
260321-3 Oct 2018