Your Product; Introduction; Package Contents; How Does It Work - Marmitek Powermid XL Gebrauchsanleitung

3 Your product

3.1

Introduction

Congratulations on purchasing a Powermid XL™. This can be used to operate your
A/V equipment with your own remote control, even the equipment is stored in a closed
cabinet, located on the other side of the room or even in another room entirely! The
compact design means that the Powermid XL™ is suitable for use in every interior.
Marmitek products are manufactured with the utmost care and are exceptionally high
quality. Please read this manual carefully and follow the instructions in order to get the
best from this product.
3.2

Package contents

A. 1x IR Receiver
B. 1x IR Transmitter
C. 2x Power adapters...
D. 1x Instruction manual

4 How does it work?

HD RECORDER
SET-TOP BOX
SATELLITE
AUDIO SET
Point your remote control at the Powermid XL™ IR Receiver. The IR Receiver receives
these infrared signals, converts them into RF signals and sends them onto the
Powermid XL™ IR Transmitter. The IR Transmitter then converts these back into
infrared signals and sends them to your HDD-recorder, set-top box, satellite decoder,
audio set, etc.

5 Installation

5.1

IR Receiver

1. Place the IR Receiver in the room/area from which you wish to operate your
equipment.
2. Point the front of the IR Receiver (with Marmitek logo) towards the point at which
you want to use the remote control (maximum 6 metres).
3. Connect the Power Adapter to the IR Receiver and insert this into the mains
socket.
4
IR TRANSMITTER
WA LL
IR RECEIVER
© MARMITEK