Annex; Technical Data; Interfaces - JUMO variTRON 500 Montageanleitung

5

Annex

5.1

Technical data

5.1.1

Interfaces

USB host
Description
Type
Number
Device category
Application
Data rate
Max. current
Ethernet
Description
Type
Number
Application
Protocol
Transfer rate
Connection cable
Cable length
RS232 or RS485 (serial interface)
Description
Type
Number
Application
Protocol
Data format
Transfer rate
System bus
Description
Type
Number
Application
USB
A (socket)
2
Mass storage class
For connecting a USB flash drive (interfaces cannot be used simul-
taneously)
Low Speed, Full Speed, Hi-Speed
500 mA per interface
LAN1, LAN2 (optional)
RJ45
1 (optional: 2)
Communication with:
- PC (setup program, web browser)
- Email server
- Modbus-TCP master/slave
- PROFINET IO device
- EtherCAT slave
- OPC UA client
TCP, IPv4, HTTP(S)
Via CODESYS as an option: Modbus-TCP, PROFINET IO controller,
EtherCAT master, OPC UA server
10 Mbit/s, 100 Mbit/s
Network cable, at least CAT5 (S/FTP)
Up to 100 m
Depending on the device version
Com1, Com2
D-Sub 9-pole
2
Fieldbus applications, communication via modem with a PC or with
an email server
Via CODESYS: Modbus-RTU master/slave
8/1/n, 8/1/e, 8/1/o
9600 Bd, 19200 Bd, 38400 Bd
None (side connector)
System specific
1
Connection of a router module 705041 or an input/output module
5 Annex
29