Operation; Basic Functions - auna AV2-CD850BT Bedienungsanleitung

OPERATION

Basic functions

The respective buttons are located on the front panel of the amplifier and
on the remote control.
1. Select an audio source by pressing the INPUT button on the unit or on
the remote control. USB, BT, AUX1, AUX2, AUX3 are set one after the
other.
2. Adjust the main volume on the volume control (VOL +/-).
3. Press the ZONE1, ZONE2, ZONE3 or ZONE4 buttons on the unit or
remote control to adjust the volume for each zone.
4. Press the BASS +/-, TREB +/- buttons to adjust the bass and treble
5. Press MUTE on to mute the audio output.
Playback via USB
1. Press the INPUT button until you switch to USB mode
2. Use the /
pause or resume playback.
Note: Supported file formats: MP3, WMA, WAV. Max USB data media
size 32 GB
Coupling with BT
1. Disconnect all BT devices that have been coupled to the amplifier.
2. Go to the BT settings of your mobile device and enable BT
3. Turn on the amplifier and set it to BT mode The blue text „BT" flashes in
the display to indicate that the amplifier is ready for coupling.
4. Start the search for BT devices with your mobile device.
5. Select the auna device from the search results.
6. Select „OK" or „YES" to perform the pairing, depending on the menu
7. If a password is required, enter „0000".
Note: To unpair, press the DISCONNECT button on the remote control.
buttons to skip to a track. Press the button to
EN
23