Connecting The Speakers - auna AV2-CD850BT Bedienungsanleitung

Connecting the speakers

• The speakers must have the correct impedance (see „Choice of
speakers"), otherwise they may be damaged.
• Do not let the bare speaker wires touch each other or other metal parts,
as this may damage the unit or the speakers.
• Make sure that the polarity of the speaker wires is correct, „+-" to +-"
and „--" to „--". If this wiring is not followed, the sound will be unnatural
and hollow.
Connecting to the speaker system
Connect the speaker terminals to wires of a suitable thickness. Disconnect
the insulation about 10 mm above the wire. If the bare wire is loose, clamp
it firmly.
EN
19