Connection And Preparation; Connecting The Antenna And Power Cord - Grundig 22 VLE 8220 SG Bedienungsanleitung

CONNECTION AND PREPARATION

Connecting the antenna and power cord

4
1
To receive digital satellite channels (DVB-S),
connect the satellite antenna cable to the
antenna socket »SATELLITE« on the televi-
sion set.
And/or:
2a To receive terrestrial digital broadcasters
(DVB-T) connect the cable for the rooftop
or indoor antenna (passive or active indoor
antenna with its own power supply) to the an-
tenna socket »ANT
or
2b
To receive digital cable channels (DVB-C)
connect the cable for the rooftop antenna
to the antenna socket
television set;
or
2c
To receive analogue TV channels, connect
the cable for the rooftop antenna to the an-
tenna socket »ANT
8
ENGLISH
3
1
IN« on the television set;
»ANT IN« on the
IN« on the television set
2
Note:
When connecting an indoor antenna you
7
may have to try it out at different positions
until you get the best reception.
3 Insert the supplied power cord into the
IN« or »DC IN« socket.
4
Plug the power cord into a wall socket.
Note:
Do not plug in the power cord of the device
7
until you have connected the external equip-
ment and the antenna.
Only use the power cord supplied to connect
7
the television set to a suitable earthed safety
socket.
Do not use an adapter plug or extension
7
lead which does not meet the applicable
safety standards. Do not tamper with the
power cord.
-----------------------------------------------
»AC