Connection And Preparation; Connecting The Antenna And Power Cord - Grundig 22 VLE 2100 DVD Bedienungsanleitung

CONNECTION AND PREPARATION

Connecting the antenna and power cord

3
1a
To receive terrestrial digital broadcasters
(DVB-T) connect the cable for the rooftop
or indoor antenna (passive or active indoor
antenna with its own power supply) to the an-
»
tenna socket ANT IN
or
1b To receive digital cable channels (DVB-C)
connect the cable for the rooftop antenna
to the antenna socket
television set;
or
1c
To receive analogue TV channels, connect
the cable for the rooftop antenna to the an-
»
ANT IN
tenna socket
Note:
When connecting an indoor antenna you
7
may have to try it out at different positions
until you get the best reception.
8
ENGLISH
2
«
on the television set;
» «
ANT IN
on the
«
on the television set
-----------------------------------------------
1
2 Plug the power cable to the
or the cable of the external power supply to
» «
the DC IN socket of your television.
3
Plug the power cord into a wall socket.
Note:
Do not plug in the power cord of the device
7
until you have connected the external equip-
ment and the antenna.
Only use the power cord supplied to connect
7
the television set to a suitable earthed safety
socket.
Do not use an adapter plug or extension
7
lead which does not meet the applicable
safety standards. Do not tamper with the
power cord.
» «
AC IN socket